Date:         Mon, 29 Apr 2002 16:49:18 -0400
Reply-To:     Karl Ploessl <ploessl@SUNMAC.SPECT.UPENN.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Ploessl <ploessl@SUNMAC.SPECT.UPENN.EDU>
Subject:      Re: Need 84 Westfalia Sink Drain Part
Comments: To: Richard Kunkel <rkunkel@KPBX.ORG>
Content-Type: text/plain; charset="us-ascii"

you wrote:
"Bus Depot does not carry it.

It is an ivory color, cup-shaped, plastic, nipple-endowed, sink-waste collector
piece that attaches the bottom of the sink drain assembly to the drain hose.
The open part of the cup faces up and attaches (by mini wing nuts) to a
similarly colored plastic piece that interfaces with the metal of the sink.
That top plastic piece is in fine shape, but the nipple on the bottom  piece,
where the drain hose attaches, has snapped off the collector cup.  That entire
bottom cup-with-nipple piece (under the wing nuts) is the part I am looking
for.

Can anyone help me?  Spouse insists we can't go camping when the sink water
simply emptys into the pantry cabinet.  It makes the macaroni noodles soggy.

Thanks.

Dick Kunkel
Spokane WA
rkunkel@kpbx.org"

have the same problem here: broken at the same position and I was looking
too. I was wonderig if the p-trap is really necessary or if it's just
possible to drain the water directly into the hose (on mine, the upper part
ends in a "cone shaped outlet" where I could  hook up a connector to the
hose). Any suggestions?

        Karl.

Karl
'81 Westy "Jenny"
Wilmington, DE