From Jens Hansen in Germany, maker of kits to fit Porsche (and custom) brakes to VW T3s like ours. Hi Andrew, how are you?. Well, things are busy over here... Yes, our rear break kit is ready and working perfect. We have made kits for nearly all porsche brakes. If you want to keep your 16"-wheels, we could make a kit with brembo-rotor with 310mm diameter and 993 turbo calipers and race-brake-pads from ferodo, pagid or performance friction. This setup would be comparable to the 993 turbo brakes and will fit your wheels. Whole kit (calipers, rotors, adaptors, brakelines, shims, bolts, hydraulik handbrakesystem etc.) will come to EURO 5700,--. Possible would also be 305mm rotors with 996 calipers and race brake pads. This would also be about the same braking power. Whole kit will come to EURO 5500,-- "Standard" 993 Turbo Brake kit complete will be EURO 5300,-- "Standard" 996 Brake kit complete will be EURO 5100,-- Alle prices are in EURO (actually i dont know th exchange rate rigth now) plus shipping and handling and plus duty. By and all the best to NZ Yours Jens Hansen Hansen Motorsport Am Kachelstein 25 53639 Königswinter Tel.: 0 22 44 / 87 09 64 Fax.: 0 22 44 / 87 09 65 www.Hansen-Motorsport.de |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.