Date:         Mon, 6 May 2002 14:57:51 -0400
Reply-To:     jbrush@AROS.NET
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Brush <jbrush@AROS.NET>
Subject:      Broken Stablilizer Link, any experts reading this?
In-Reply-To:  <5.1.0.14.2.20020506121829.04081cf0@gemini.tntech.edu>

>   Chris Mills <scmills@tntech.edu> said:

>Sway bar bushings?

Pretty close guess :-)

The stabilizer link broke right off from the bushing on the strut bar,
passenger side.

Outside of the aggravation and the irritation, I am at least pleased to
see a problem that can be fixed.

I have several questions if I may.

I searched a few vendor sites and didn't find any Stablilizer Links right
off the top. Where should I look for one? Any chance of replacing it
without removing the whole stabilizer bar? The upper bushing looks like a
mean little guy. What are the odds of getting the whole bar off from an 81
van without breaking the mounting bolts? Will I be able to get all the old
bushings out and the new ones in, or do would I have to have someone do it
for me?

Is my van unusable without that link attached? I would never let it go
beyond the time it takes to get parts, but I am short of vehicles at the
moment, so I would still like to carefully drive it unless that would be a
major safety problem.

Thanks for any advice or words of comfort :-) I just got done telling
folks how my van runs and runs without any problems........... <g>

Regards from Utah,

John