Date: Sat, 11 May 2002 12:20:34 -0400
Reply-To: Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject: Re: 3 passenger front seating for Vanagon Westy
In-Reply-To: <200205111530.FQR00993@vmms5.verisignmail.com>
Content-type: text/plain; charset=US-ASCII
Vans that are designed to use this seat actually have a partition wall
that goes across the van. The seat back is supported by this wall.
Dennis
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of 80 Westy Pokey
Sent: Saturday, May 11, 2002 11:30 AM
To: vanagon@GERRY.VANAGON.COM
Subject: 3 passenger front seating for Vanagon Westy
Well I got my "double wide" seat on Thursday and was VERY
impressed! As I was told it slide right into the stock
passenger side seat rails. But before I can carry three
people up fron there are two complications:
1) The bench seat is hinged and won't stay upright on its
own. I am not sure how to secure it. Ideally, I'd like
something that could be removable.
2) I have the seatbelts but I am not sure where to mount
them. The lock portion of the passenger belt is now hidden
by the middle part of the bench. The middle passenger has a
lap belt.
I thought about trying to use the leg holder of the front
table (as the bench instalation has made this table more or
less redundant). And maybe mounting a second table mount on
the passenger side. but I would like to somhow secure it to
the piller where the passender seat belt attaches too. Any
thoughts? Has anyone done this? Does anyone have pics?
Thanks,
Chris
---- Original message ----
>Date: Fri, 19 Apr 2002 20:29:47 -0700
>From: David Marshall <vanagon@VOLKSWAGEN.ORG>
>Subject: Re: 3 passenger front seating for Vanagon Westy
>To: vanagon@GERRY.VANAGON.COM
>
>Please see ###
>
>David Marshall
>
>Fast Forward Automotive Inc.
>4356 Quesnel Hixon Road
>Quesnel BC Canada V2J 6Z3
>
>http://www.fastforward.ca mailto:sales@fastforward.ca
>Phone: (250) 992 7775 FAX: (250) 992 1160
>
>- Vanagon Accessories and Engine Conversions
>- Vanagon, Transporter and Iltis Sales and Importation
>- European Lighting for most Volkswagen models
>
>-----Original Message-----
>From: Vanagon Mailing List
[mailto:vanagon@gerry.vanagon.com]On Behalf
>Of 80 Westy Pokey
>Sent: April 19, 2002 8:17 AM
>To: vanagon@GERRY.VANAGON.COM
>Subject: 3 passenger front seating for Vanagon Westy
>
>
>I have a line on the passenger bench from a '86 or '87
pannel
>van that uses a single seat for the driver and a two person
>front bench seat for the passengers. Unfortunatley the
>drivers seat is missinga, and the wrecker is reluctant to
cut
>out the seating hardware so my questions are:
>
>1) Can I use my regular Westy drivers seat with the pannel
>van 60% right side bench?
>
>### Yes.
>
>2) Should I just forget it if I can't get the seating
>hardware or will it pretty much bolt onto what is in place
>already in my westy?
>
>### What seating hardware - you remove your single seat and
slide in the
>double wide seat - no additional hardware.
>
>3) will I have issues with the handbrake or shifter?
>
>### No, shifter is not a big deal unless you are the middle
guy why is
>careless where you put your legs. There is more than
enough room to get
>your hand between the two seats to grab the ebrake.
>
>### In case you are interested, I have a double wide front
seat (grey vinyl)
>you can have for $50 USD plus shipping. It is able as
complete as you can
>get for a double wide passenger seat.
>
>Thanks,
>Chris