I have seen the WBX broken stud problem once or twice the studs become corroded etched mostly at the base of the stud near the block and you might see that more than stud that is pitted when you look closely. the stud is often not willing to turn even with a nut or extension of some sorts added to it. I have had limited luck drilling this as they are hardened and down in the corner of the coolant jacket. I have sent them to Jerry's Broken drill and tap Santa Anna don't have the # . they have metal disintegrator that cores the stud then it comes right out. to do this the block must be stripped and cleaned or you could by a long block from me Bob http://www.bostonengine.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.