>Ok, so the cv is still turning the same direction isn't it? Don't see >how this does anything because the angle is the same from the tranny to >the wheel. (parallelogram working here) > >Now swapping sides, inner to inner, would make them go the other >direction. That would be roughly the same as turn one around on the >same side. But be sure you don't swap both left-side-for-right AND inner-for-outer. EITHER will reverse the direction of rotation and -- supposedly -- extend the life of the CV. But if you do BOTH, each CV will end up rotating the same way it was before the swap, and you'll have gained nothing but greasy hands and skinned knuckles. Do the "roll up a piece of paper" desktop example of axle rotation suggested earlier in this thread and you'll see why. Dave -- Dave Carpenter Whatever you wish for me, May you have twice as much. "Sometimes I think we're alone in the universe, and sometimes I think we're not. In either case the idea is quite staggering." -- Arthur C. Clarke |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.