Date: Tue, 14 May 2002 20:04:40 -0400
Reply-To: Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Subject: Re: rotating cvs and axles from left to right
Content-Type: text/html
<html><div style='background-color:'><DIV>
<P>your logic makes sense to me. i am not a professional mechanic, just a hobby on my van. i went with swapping sides and inny to outty based on information from a couple of sources. maybe swapping sides is not necessary, but i did it anyways and can't say it has hurt and can't say it helped. i was just relaying my experience with you. maybe someone else on the list can elaborate on this.</P>
<P>good luck!</P>
<P>jason</P>
<P>90gl</P>
<P><BR><BR> </P></DIV>
<DIV></DIV>
<DIV></DIV>>From: Matthew Pollard <POLL7356@UIDAHO.EDU>
<DIV></DIV>>Reply-To: Matthew Pollard <POLL7356@UIDAHO.EDU>
<DIV></DIV>>To: vanagon@GERRY.VANAGON.COM
<DIV></DIV>>Subject: Re: rotating cvs and axles from left to right
<DIV></DIV>>Date: Tue, 14 May 2002 16:57:05 -0700
<DIV></DIV>>
<DIV></DIV>>Ok, so the cv is still turning the same direction isn't it? Don't see
<DIV></DIV>>how this does anything because the angle is the same from the tranny to
<DIV></DIV>>the wheel. (parallelogram working here)
<DIV></DIV>>
<DIV></DIV>>Now swapping sides, inner to inner, would make them go the other
<DIV></DIV>>direction. That would be roughly the same as turn one around on the
<DIV></DIV>>same side.
<DIV></DIV>>
<DIV></DIV>>Matthew
<DIV></DIV>>
<DIV></DIV>>Jason Willenbrock wrote:
<DIV></DIV>> >
<DIV></DIV>> > matthew,
<DIV></DIV>> > i did this to my 90 gl when replacing my engine 15,000 miles ago. i put
<DIV></DIV>> > inner to outer on opposite sides. when i pulled the cv's apart i had them
<DIV></DIV>> > power cleaned, i noticed slight wear where the balls were riding, but
<DIV></DIV>> > nothing major. so i repacked them(what a job that was!) and swapped sides
<DIV></DIV>> > and haven't had a problem. the mechanics i inquired with about this job,
<DIV></DIV>> > suggested that i did swap them opposite sides and inny to outty. they said
<DIV></DIV>> > that would allow the balls to ride on a new surface thus significantly
<DIV></DIV>> > extending the life of the cv's. i am sure this goes with out saying but, i
<DIV></DIV>> > would replace any boots that look worn as this is what keeps the dirt out
<DIV></DIV>> > that causes wear on the joints.
<DIV></DIV>> > good luck!
<DIV></DIV>> > jason
<DIV></DIV>> > 90gl
<DIV></DIV>> >
<DIV></DIV></div><br clear=all><hr>Get your FREE download of MSN Explorer at <a href='http://g.msn.com/1HM305401/44'>http://explorer.msn.com</a>.<br></html>
|