Date:         Fri, 10 May 2002 13:37:50 -0700
Reply-To:     Matthew Pollard <poll7356@UIDAHO.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Matthew Pollard <poll7356@UIDAHO.EDU>
Organization: Shitbag.com
Subject:      Re: [Syncro] will this work in a syncro?
Comments: To: vw4x4@fyi.net
Comments: cc: "Vanagon-EngConv@yahoogroups.com"
          <Vanagon-EngConv@yahoogroups.com>
Content-Type: text/plain; charset=us-ascii

here is one- sound-dampen the complete air-intake system (housing inside
and out and snorkel). that supposedly helps...
matthew

vw4x4@fyi.net wrote:
>
> Before you go thru all that trouble,
> try a simple right angle turn for a tail pipe.  This makes
> a major difference with the original Vanagon exhaust.
>                                                   Eric
>
> Matthew Pollard wrote:
>
> > i have an inline 4 engine- it's a pretty noisy engine. Does anybody think
> > or can see a way to get this exhaust system (or like that) to fit:
> >
> > http://volksweb.relitech.com/helmut/EXHAUST.HTM
> >
> > the tiico doesn't leave much room for more mufflers, etc, so something
> > like this is what i was thinking about. My wife HATES the noise. Yes, i'll
> > be adding sound dampening once it's warm outside. I tried to have a
> > resonator installed this morning but the shop said it won't work w/o more
> > run for the pipes... like the above web page.
> >
> > matthew
> > 86 syncro westy tiico
> >
> > Matthew Pollard          "Racing with the wind and flirting with death
> > Dept. Of Chemistry        So have a cup of coffee and catch your breath"
> > University of Idaho
> > www.uidaho.edu/~poll7356
> >
> > If you would like to modify your subscription settings (including unsubscribing), visit:
> > http://groups.yahoo.com/group/Syncro
> > Please remember that rude or offensive language is not allowed on the Syncro list. Please try your best to resolve differences privately and keep them off the list.
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/