Date:         Mon, 13 May 2002 18:33:49 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: 84 Westy std. trans
Comments: To: Jeff Engel <rambler64@SHAW.CA>
In-Reply-To:  <007401c1fa9c$937cdb00$09b24618@jeffxprkqers6t>
Content-type: text/plain; charset=us-ascii

If he does not know how and where to get the parts, you may want to
consider letting him learn on someone else's transmission. He probably
does not have the special tools neither. Also, make sure the clutch is
disengaging properly. 2nd gear seems to be the first to complain when
the clutch does not release right or if the pilot bearing is bad.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of Jeff Engel
Sent: Monday, May 13, 2002 12:38 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 84 Westy std. trans

Am getting a constant grind every time i shift from first to
second gear.(double clutching doesn't help). Wastold by local VW
dealerships in Winnipeg its most likely my first to
second synchronizer ring. I found someone locally that says
he can overhaul it but we both are unsure of where to find an
overhaul kit.Am worried that once the trans is all apart buying pieces
one by one from the dealer could get very
expensive.Am possibly considering buying a rebuilt unit or
trying to find a good used. Any ideas or help would be greatly
appreciated.

Thank's from Jeff in Winnipeg