Another issue I thought I would mention. When activated, whether the car is running or not, the Hazard/Emergency flasher switch buzzes loudly, glows red, activates the turn signal indicator LED and does NOT flash the lights. If you activate the turn signals, either right or left, while it is freaking out like this the buzzing subsides and that particular sides lights will flash. Additionally, the switch, if not perfectly turned off, will do the same buzzing and glowing red thing. Slap it, massage it, etc. and it will stop. Wires are all intact and there does not seem to be any short external to the switch. My guess would be bad switch? Any thoughts? I am currently pouring over the Bentley wireing diagrams for some answers to both of these recent posts. Thanks as always, Derek '84 Wolfsburg w/ Tiico |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.