VANAGON archives -- May 2002, week 3 (#24)

Date: Wed, 15 May 2002 05:45:51 -0500 Reply-To: Marshall <mjruskin@SHAW.CA> Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com> From: Marshall <mjruskin@SHAW.CA> Subject: removing rust on poptop from corroded rubber seal... Content-Type: text/plain; charset=iso-8859-1

Hi Volks:

1. My new poptop seal has arrived from BusDepot - yahoo! - and now I've got to remove the rust on the fibreglass left from the old seal.

I was planning on using CLR and a rag.

Do you guys know of a better way to do it?

2. My new TempII sensor has arrived.

I was going to just R and R the old one. Should I use some sort of sealing compound or new gasket etc? (I've never done one of these before.)

Thanks,

Marshall Ruskin 84 Westy

--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.361 / Virus Database: 199 - Release Date: 5/8/2002

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.