I had a post on here last week about the issue about my van stalling in the morning when the engine is cold. Well I replaced the coolant temp sensors and it still stalls. So here are my questions. -Would a exhaust leak cause this. -Would having no o2 sensors do this. (I used a bypass pipe instead of a catalic converter $$$) -I also have 2 hole infront of my airflow box (where f/i ppes are, behind the distributor) the holes are pluged with 2 bolts right now, but what are the holes for? ___________________________________________________________________ Chris Winesette American Advertising Director, Creative Media chriswinesette@aol.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.