Marshal; I would check for twelve volts on the harness plug to the AFM with the ignition on. Chec for a good ground also.
Good Luck and Drive Safely Ken Lewis 86 Crewcab,60 356 http://Neksiwel.20m.com/ On Mon, 27 May 2002 18:59:33 -0500 Marshall <mjruskin@SHAW.CA> writes: > Hi Volks: > > My engine won't run for but a few seconds and roughly at that. > > Using the digitool, I see that the AFM is not producing a control > voltage. No change in the AFM voltage output as I vary the > throttle. ________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.