Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (May 2002, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Tue, 28 May 2002 12:19:06 -0500
Reply-To:   Stan Wilder <wilden1@JUNO.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Stan Wilder <wilden1@JUNO.COM>
Subject:   Re: Exaust Systems
Comments:   To: william.russell@uw-inc.com
Content-Type:   text/plain; charset=us-ascii

That is very true about used parts but if you want to return to OEM system with the EGR valve, pipe and adjustment rod you are SOL because these parts are not available new. I hope my abreviation hasn't confused you. I'll be here waiting for you to tell me that Bus Depot can only furnish the under car parts.

Stan Wilder

On Tue, 28 May 2002 10:45:05 -0400 "Russell, William" <william.russell@uw-inc.com> writes: > Stan, > > In Ontario, vehicles older than 20 years do not have to undergo > emissions testing. Mine is a 1980 so I am free from that. I would > like > to be environmentally conscious if possible, but if it's making no > difference than forget about it. My concern buying used parts is > how > long I can expect them to last. I want to restore my Westy to a > good > strong vehicle. If I finish the exhaust, I want it to be finished > for a > long time. If I use used parts don't I risk needing to replace > them > again in a year? > > \/\/i!!y > > -----Original Message----- > From: Stan Wilder [mailto:wilden1@juno.com] > Sent: May 28, 2002 10:29 > To: william.russell@UW-INC.COM > Cc: vanagon@GERRY.VANAGON.COM > Subject: Re: Exaust Systems > > William........... the cheapest way to go is the S&S Header System > and > if > you don't have to deal with Emissions Inspections then this is > probably > what you should buy. > As far as ceramic coating, don't waste your money the weakest link > is > one > tiny pinhole that rots out. > If you've got to have a Federal System to pass inspections then I > can > help with some of the obsolete no longer available parts. > > Stan Wilder > > On Tue, 28 May 2002 10:16:47 -0400 "Russell, William" > <william.russell@UW-INC.COM> writes: > > Greg, > > > > Thanks for all the advice! I know this is a stupid question, but > > > what > > is the EGR portion of the exhaust? > > > > \/\/i!!y > > > > -----Original Message----- > > From: Greg Marshall [mailto:earthboy@rogers.com] > > Sent: May 28, 2002 09:34 > > To: Russell, William; vanagon@GERRY.VANAGON.COM > > Subject: Re: Exaust Systems > > > > Here's my take on the situation. > > > > First of all, get yourself a new pair of heater boxes. The heater > > > boxes > > (or > > exchangers) bolt directly onto the heads. E-mail Stan Wilder. I > > think > > he > > has a goiod used pair. Next, order an S&S header and muffler like > > > this > > one. > > > > http://www.gexintl.com/48s&sheaders4.htm > > > > Bolt this onto the heater boxes and you're done. Easy, simple, > > cheap, > > and > > you'll improve your horsepower. > > > > Other things to check out are the engine tin, and the metal tubes > > > that > > complete the heating system. If the exhaust has been truly > > dismantled > > and > > screwed around, these may be gone. You need them. there are two > > > tubes > > that > > come off of the heater boxes. One from each end. They brong cool > > > air > > in > > from the alternator blower, and take warm air away, out to the > heat > > control > > valves. As far as engine tin, you should at the very least have > the > > two > > bottom pieces that cover the pushrod tubes. > > > > Don't worry about putting a cat back in. If it didn't have one, > > don't > > add > > one. > > > > The alternative is rebuilding the system as it came from the > > factory, > > which > > would be really expensive unless you can score the whole system > > used. > > The > > crossover pipe alone is in the 300 dollar range if you can even > > find > > one. > > > > Only consideration with this setup is what to do with the EGR. I > > > don't > > have > > one, so I'm not to sure, but I think you could likely get rid of > > it. > > Not my > > area of expertise. (o2 sensors though, ....just ask me!) > > > > I'm a big fan of the S&S header. Extra power, nice sound, and > very > > simple. > > If you can afford it, get it professionally ceramic coated before > > > you > > put it > > on, it'll last much longer. > > > > You can handle the job on your own. If you have any questions, > > just > > send me > > an e-mail, > > > > Greg > > 82 Westy. > > > > "Russell, William" wrote: > > > > > There is just no end to the stuff that I want to fix on my > Westy. > > The > > > exhaust system is horrible. Apparently, a PO was in Mexico, > > suffered > > > problems, and had a mechanic bastardize the system any way he > > could. > > > I'd like to consider replacing the whole system. I'd like to go > > > high > > > quality and original parts if at all possible. I guess I need > > whatever > > > the bits coming off the engine are (help!), the heat exchangers, > > > the > > > crossover, muffler, tailpipe, et cetera. I have a few > questions: > > > > > > Any recommendations on who to buy it all from? Past > experiences? > > > > > > I currently have no catalytic converter. I think my Westy was > > built > > for > > > Canada. Can I add one now? Should I? I'd like to be > > environmentally > > > responsible if at all possible. > > > > > > Can I do this myself? I don't have a welding torch. I'm pretty > > > good > > > with problem solving and tools but I'm new to working on > vehicles. > > I > > > have a brother-in-law who's a mechanic that I might be able to > get > > to > > > help if I need him. > > > > > > Anything else I should take into account? > > > > > > Thanks, > > > > > > \/\/i!!y > > > > > > 1980 Westy "Jazzy" > > > > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/web/. > >

________________________________________________________________ GET INTERNET ACCESS FROM JUNO! Juno offers FREE or PREMIUM Internet access for less! Join Juno today! For your FREE software, visit: http://dl.www.juno.com/get/web/.


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.