Hi L, Turns out you'll need to adapt the 9004 plugs and wiring to an H4/DOT 7" socket. Easily done. Sockets available at the local flaps. You'll need some suitable female...spade lugs. I presume you have a suitable female already. The two pronged leads for the auxilliary lights will work as is. You WILL need a set of 7" light buckets and they do mount up fairly well to the existing tabs. I had to do a little pursuading and realignment. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.