Scott, Once out .... don't forget to turn the fridge upside down to "BURB" it. Made a huge difference in the performance of my unit. I let it sit upside down over night. Turned it over, plugged it into 110V and let it run 12-14 hrs. And burped it once again before reinstalling. Local LP guru tipped me to the burping. Larry Chase 85 Westy "RoadHaus" CA soon to be AZ
>>> Date: Mon, 20 May 2002 00:13:55 +0000 From: Mike Finkbiner <mike_l_f@HOTMAIL.COM> Subject: Re: fridge removal Scott - I have had my fridge out several times without pulling the cabinet in my '87. Remove the front wooden trim that holds the door, get into the cabinets on the left and right and pull the two screws on each side. With the drawer removed, you can reach the gas line with a short wrench and loosen it. Be sure to turn off gas at the tank first, no open flames, etc. The 110 v line just plugs in under the sink. I seem to remember the 12v line being a bit hard to unplug, but it does come apart. <<<< |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.