Well I checked all conections this weekend. And all is well the van starts fine. After running a few seconds it slowly stalls out. I have to start driving to get it to start. Once in gear it stalls quicker (if the engine has been running for about 1/2 hour it runs a little better) I set the idle about 1000 so when I put it in gear and the idle drops it won't stall, but it still does. When I take off the wiring from the coolant temp sensor the idle doesn't really change, it just smooths out. I really don't have the $ to pay someone to look at it. If I have to I will but I want to check all the things out I can on my own. Chris Winesette American Advertising Director, Creative Media chriswinesette@aol.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.