Forgive my display of ignorance, but why does Bentley want those wrist pins replaced when all we're wanting to do is pull the head, fill any pits and make sure it's reusable, and put a new gasket on? Is it just a "while you're at it" sort of thing? Or is it really critical to the process? TIA. Dave in KC 85 Westy 4 days in to a head repair. ----- Original Message ----- From: Tony Thompson <tonyt_eye@NS.SYMPATICO.CA> To: <vanagon@GERRY.VANAGON.COM> Sent: Friday, May 31, 2002 6:51 PM Subject: Re: 84 head job update and questions
> I just finished doing this without any special tools, the circlips can be > removed with snap ring pliers or a small set of needle nose pliers. It is a > really good idea to shove rags around the piston bases so that errant parts > don't zing off into the interior of the engine. I found the wrist pins very > difficult to remove. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.