Date:         Thu, 30 May 2002 09:20:39 -0400
Reply-To:     jegrenon@MTQ.GOUV.QC.CA
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dje Mobile <jegrenon@MTQ.GOUV.QC.CA>
Subject:      water level indicator light
Content-Type: text/plain; charset="iso-8859-1"

hi everybody,

i have a problem with the water level indicator light (green, yellow and
red). When the tank is full, it's green, (no problem)
when the tank is between the upper sensor and the one below, the yellow
light don't work and the red light is on instead of the yellow one
(problem!). when the tank is empty, the red light is on.(no problem)

So the problem is the yellow light don't stay lit and go to the red. Another
symptom is when i put "on" the panel switch, the yellow light is on for
10-20 seconds and go red after this. I have tried different combinaison with
wires and sensors by interchanging them and i have concluded that the
sensors in the tank are ok.

somebody can help me?

p.s. the sensor are not on the top cover of the tank but in the side of it
and my west is a 1982.

thanks a lot
JEROME GRENON 
djémobile, Westfalia 82 Diesel
McMasterville, QC, Canada
dje1er@icqmail.com