Just had mine all apart, but did not notice the problems you describe. Could it be the routing of the wire harness? I'll check mine again. Mike ----- Original Message ----- From: "Brent Christensen" <sbsyncro@HOTMAIL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, June 05, 2002 10:42 AM Subject: Re-wiring doors (power windows, etc)
> Has anyone completely rewired their driver's side door in order to cure the > problems associated with the lack of proper strain relief? (This causes the > wires to kink and the side mirror and/or power windows to quit working) > > I will be embarking on this project this weekend, and wondering if anyone > has BTDT and has some words of advice/suggestions. I am assuming that > finding wire that matches the color scheme of the stock wiring will not be > difficult.... > > Brent Christensen > '89 GL Syncro Westy > Santa Barbara, CA |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.