Darrell, You need a DIN radio removal tool, available at a car stereo dealer. Or, alternatively, you may have success with two 6" sections of 1/8" welding wire bent into a 'U' shape, before bending you'll want to file or grind a smooth but not sharp point on the ends. These pieces are then pushed into the four holes you will see in the front plate of your radio. With a little wiggling, the radio should pop free. Have fun! Karl Mullendore Westy Ventures 1987 Westfalia Syncro 1.9TD *********************************** how do you get the radio out of its hole i have new one to put in its place! i have a 88 model Darrel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.