What software are you using? The TiiCo kit is NOT OBD2 compatible. The TiiCo is OBD1... Very similar to the 93 through 95 US model Golfs/Jettas. I have generic OBD2 scan software and it won't see the TiiCo at all, but with VAG-COM (VAG 1551-2 emulator for Windows) I can get into the ECU. VAG-COM has an option to test the ECU for OBD2 copatability... The TiiCo fails this. Sean B. '90 V'gon, "Happy Bus", pseudo Wolfy '79 Yamaha 750 Special (new addition) Torrance, CA Join the TiiCo registry at HTTP://www.vgonman.com Vanagon Mailing List <vanagon@gerry.vanagon.com> wrote on 06/11/2002 12:00:30 PM: > Listers, > > > Has anyone out there succeeded in using an OBD2 scan tool on their tiico? I > recently added the OBD2 connector to the ecu (as per Peter's instructions) > but the OBD2 scan tool is not sensing the output from the ecu. Peter thought > there might be another pin that needs to be brought out to the connector but > could not recall which one. > > I also have a 2.1L engine with a cracked block that I can part out. If you > need an ecu, water pump (new in July), complete exhaust system (headers have > not begun to rust, AFU, AMC Heads, send me an email. > > Noel '88 GL tiico |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.