I'm looking for the entire vacuum control system for the locking differential system on a Syncro vanagon.. There is a control valve(with knob, nut, and faceplace) in the dash somewhere, and hard plastic hose going from 3 fittings on the control valve: two of the hoses to the vacuum servo on the side of the transmission, and the third hose goes to the vacuum resevoir and then on to the intake manifold. There is the vacuum resevoir which I believe is attached under the car to a frame rail, and there is an indicator light(with faceplate) somewhere in the front cabin...I'm not sure if it's on the dash. I'm a bit hazy about the locations because I'm putting this into my 1983 non-Syncro Westphalia, on which I had the transmission converted to include the locking differential. It's installed now and running so if anyone has a Syncro they're parting out, or a box full of these parts, or knows of a junkyard with a Syncro, please let me know. Vacuum control valve, faceplate and knob and nut Hard plastic vacuum lines Vacuum resevoir Indicator light, faceplate(?)
John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.