Here is what you need for sure: obd pin # 4- chassis ground 5- signal ground (4 and 5 are the same ground actually) 7- K line 15- L Line 16- unswitched vehicle battery positive (aka, 12V from the battery in the bus). My rig only had 15, 7 and 4 as supplied from tiico btw. hope this helps Matthew "Cookson, Noel" wrote: > > I checked pin 16 and I had 12v. What pins do you use? I use 4, 7 and 16. > > Noel '88 GL tiico > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.