>For high altitude problems, you can install a smaller jet (prolly not >available) or adjust your regulator to lower pressure Get a set of "numbered" drill bits and use the bits to determine the size of the original jet. Get a propane torch and solder up the hole in the old jet. Drill out the soldered up hole to the new smaller size. Use a dremel or similar high speed tool as the drill. I've never done this with a Dometic fridge, but that's how I rejet furnaces, old cars, motorbikes etc. Gary Lee Honda XR600R, rejetted many times http://www.telusplanet.net/public/gary2a/rack/vanagonrack.htm |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.