Early Westy models had the external pump mounted under the sink. These models had a separate inline fuse holder adjacent to the pump. It is a black tube with wire coming out of each end. Mark
Steve Selin wrote: > > Hello, > > My sink pump works and the switch at the faucet works BUT the pump does no > go on when the switch is activated. > > All fuses look good. I checked, and there is no juice getting to the pump. > Looking at the fuses by the driver door pillar there are 2 that are separate > from the rest. All fuses look good. > > I looked under the driver seat and found a fuse (16) that is good. There is > another wire in there that gets 2-3 volts when the key is in the ON > position. > > Any idea where the juice is for my pump? > > Thanks, > Steve > > _*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_ > > Steven Selin - s.j.selin@vt.edu |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.