Date:         Mon, 17 Jun 2002 09:16:46 -0400
Reply-To:     Steve Selin <sjselin@NETZERO.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Selin <sjselin@NETZERO.NET>
Subject:      RE : sink pump mystery - 1981 westy
Content-Type: text/plain; charset="Windows-1252"

Thanks.  That one is fine too.  It is about 3 inches from the pump.

That fuse is not getting any juice.


Steve


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of mark drillock
Sent: Sunday, June 16, 2002 10:58 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: sink pump mystery - 1981 westy


Early Westy models had the external pump mounted under the sink. These
models had a separate inline fuse holder adjacent to the pump. It is a
black tube with wire coming out of each end.

Mark



Steve Selin wrote:
>
> Hello,
>
> My sink pump works and the switch at the faucet works BUT the pump does no
> go on when the switch is activated.
>
> All fuses look good.  I checked, and there is no juice getting to the
pump.
> Looking at the fuses by the driver door pillar there are 2 that are
separate
> from the rest.  All fuses look good.
>
> I looked under the driver seat and found a fuse (16) that is good.  There
is
> another wire in there that gets 2-3 volts when the key is in the ON
> position.
>
> Any idea where the juice is for my pump?
>
> Thanks,
> Steve
>
> _*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_
>
> Steven Selin      -        s.j.selin@vt.edu