Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 17 Jun 2002 11:48:39 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: removing dash w/o steering column
Comments: To: Dan Barrett <dan@OFFTHEHILL.ORG>
In-Reply-To:  <15569.12.104.6.129.1024326295.squirrel@www.offthehill.org>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 11:04 AM 6/17/2002, Dan Barrett wrote: >Folks, > I'm contemplating rewiring the door speakers with nicer cable. Do I really > have to take off the steering column in order to take the top off the dash?

No -- in fact you shouldn't -- but you do have to unbolt it in two places (two regular bolts and two special).

> I kinda want to avoid having to drill out (and find replacements for) the > bolts that the Bentley says hold in the steering column. Has anyone > done this?

Visegrips usually work fine for removing the special bolts. Use sharp visegrips and grip as close to the bottom of the head as you possibly can. The designers slipped up a little and left just enough flat for the visegrips to grab.

For replacing I would recommend regular bolts. Those tamper-resistant bolts are supposed to make it harder for the thief to drop the column and remove the ignition lock -- but I doubt any thief in this country would bother with that method anyway.

david ps -- for completeness: There are those who maintain that the special bolts are to ensure correct torque so that the steering-wheel will collapse properly during an accident. InMyNotSoHumbleOpinion those folks are wrong -- the column will collapse forward (not down) without disturbing those bolts at all. The upper support struts are bent in such a way as to ensure their proper collapse (as you will see when the dash is off). Anyone interested in the principle can see it in the hood of any modern conventional car -- the longitudinal struts that stiffen the hood are notched in the middle so that in a collision the hood will fold in half instead of cutting the driver's head off (there are also a pair of strong hooks to catch the rear edge of the hood).

-- David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation"


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.