Date:         Mon, 17 Jun 2002 19:00:43 -0400
Reply-To:     Bob O Shaughnessy <vanagon@COLUMBUS.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob O Shaughnessy <vanagon@COLUMBUS.RR.COM>
Subject:      Re: Wiring loom routing into cab? (82 diesel)
In-Reply-To:  <52ECDE0C-7FBF-11D6-AFD2-0003938E6706@ubc.ca>
Content-type: text/plain; charset="US-ASCII"

    Tobin, when I ran the oil pressure wire for my 85 I ran along the left
side as you did.  When I got to the front I pulled both grilles and was able
to fish the wire up behind the dash.  Behind the dash, I was able to pop the
wire through a rubber grommet with a bunch of other wires, and get to it
from under the dash.  The fact that it was red really helped.

    It might help to start some wire through from under the dash and see
where it falls.

    Keep going, you'll find the way.  If you completely run out of options,
drop the spare and put it through with the coolant hoses.


_________________________________________________________

Bob O'Shaughnessy,         Columbus, OH
vanagon@columbus.rr.com
99 A3 Jetta TDI
85GL with basic Westy interior
82 Diesel Westy (with blown engine)
74 Bus (Dad's)
72 Wife, 95 Cat, 96 Cat, 98 Kid, 00 Kid, 01 Dog
25 House