Date:         Wed, 19 Jun 2002 14:52:33 -0700
Reply-To:     developtrust <developtrust@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         developtrust <developtrust@COX.NET>
Subject:      Re: running board/side step for vanagon
Comments: To: Martin Walz <mwalz@VMRESEARCH.ORG>
Content-Type: text/plain; charset="iso-8859-1"

It seems to me that if you use a replacement scissor jack no removal is
necessary. Only the stock jack that fits in the holes used would require
removal of the running board. Am I right about this?

William


> >         So it must be REMOVED to use the jack-holes? What a pain
> >         in the case of a flat!
>
> Does anyone have one of these running boards and do you really have to
> remove them to use the jack?
>
> Marty
> 91 Carat

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.