Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 19 Jun 2002 22:19:19 -0700
Reply-To:     mike <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike <mwmiller@CWNET.COM>
Subject:      Re: H water distributor
Comments: To: agmartin@gis.net
In-Reply-To:  <001001c21813$a1faab00$423229d8@gis.net>
Content-type: text/plain; charset="US-ASCII"

As David B pointed out I was wrong in what I was calling the H shaped piece. The one that broke was on the firewall and has the bleed valve on it. Apparently the part called the H shaped piece is next to the overflow tank and is NLA.

Oh, well live and learn...or not.

mike

> From: "Andrew G. Martin" <agmartin@gis.net> > Reply-To: <agmartin@gis.net> > Date: Wed, 19 Jun 2002 21:33:29 -0700 > To: "'mike'" <mwmiller@CWNET.COM> > Subject: RE: H water distributor > > Mike, > > I'm uncertain about what you need. Here's a photo. Is this the piece you > are looking for? (Part number 025-121-438) It's mounted near the expansion > tank on my 85 Westy, (standard trans). If this is the part, you are right, > this part is NLA. There has been some discussion about making this part out > of copper or brass tubing but I haven't heard about or seen the results. > Mine split about three months ago and I found one used for $25. In time, > they are all going to split and a solution is needed! Only VW would > discontinue such a complex little piece. > > The other "H" shaped piece (with the bleeder valve) is mounted on the > firewall and is still available. (Part number 025-121-082) Ken Wilford at > Van-Again sold me a new one for $42 plus shipping. Easy install once you > get the hoses free. > > Andrew > > > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of mike > Sent: Wednesday, June 19, 2002 5:57 PM > To: vanagon@GERRY.VANAGON.COM > Subject: H water distributor > > > I posted earlier today that my H water plastic piece in my '85 broke. I > found a new replacement at the local dealer despite being told that it was > NLA, both on the list and by the junkyard - which wanted $75 for a used one > that they didn't have. > > I got my old one out and what broke is the little pipe which comes out under > the bleed valve. My mechanic buddy says he knows of nothing which will glue > it together but it might be possible to heat a metal tube and sweg [sp?} it > in place. > > Anyone needs this H fitting and can't get it, and would like to try the fix > it's yours for the shipping. I'm in Sacramento, CA. It's for a manual > transmission van by the way. > > Mike >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.