Date:         Fri, 21 Jun 2002 06:28:12 -0500
Reply-To:     wilden1@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Sandwich plate question?
Comments: To: vgonman@msn.com
Content-Type: text/plain; charset=us-ascii

First: It has an O ring seal that goes between the Sandwich plate and the
OEM filter mount, if you don't have one - get one.
Second, the sandwich plate has an oil bypass port set to a higher
pressure than the OEM port in the filter mount. The OEM port in the
filter mount needs to be blocked off with a small freeze plug.
I see that I've saved you hours of frustration and heartache.

Stan Wilder

On Fri, 21 Jun 2002 05:24:45 -0400 Vanagon man <vgonman@MSN.COM> writes:
> Volks,
>
> I am about to install my auxiliary oil cooler today, and in the kit
> from the bus boys there is a sandwich plate adapter that goes onto
> the oil  filter housing..............It is just a metal thing, no
> seals or anything.  It fits in the stock location and the oil filter
> will still screw on?  I want to have all the questions worked out
> before I start the install, for i want to do it all at the same
> time!!!
> Adam P
> 81  Westy "The Brick "
> 70 Single Cab "Whitey"
> 74 Beetle "Ol Yeller"
> 73 Transporter (STILL at paint shop)
> 1988 Vanagon Wolfsburg
> 75 Campmobile "for sale'
> Used Vanagon Parts for sale (mostly aircooled)
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.