Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 16 Jun 2002 23:05:16 -0400
Reply-To:     "Michael S. Nichols" <msnichols@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Michael S. Nichols" <msnichols@MINDSPRING.COM>
Subject:      Re: Starter for 1981 automatic: questions
Comments: To: Steve Selin <sjselin@NETZERO.NET>
Content-Type: text/plain; charset="Windows-1252"

Hello from Atlanta, Ga. If you need to have three contacts for the wiring, and the starter has but two, go to Radio Shack and get a 2>1 blade adapter that will slide on the starter blade terminal and make two terminals for you. A pkg. of several costs under $2.00 . I hope this is helpful! Regards,

Mike Nichols 2--'81's w/std. trans. ----- Original Message ----- From: "Steve Selin" <sjselin@NETZERO.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, June 16, 2002 6:51 PM Subject: Starter for 1981 automatic: questions

> > Hi, > > > > I just bought a starter for my 1981 (automatic) van. The picture looked > > just like the one I had. BUT it is missing 1 contact. There are 3 > > contacts on the (old) solenoid (not counting the bolted contact). There > > are 2 in a pair (red wires), and there is one by itself (blue wire). The > > new starter is missing this third contact. Anyone know what's going on? > > > > I am told there were early and late model 1981s and the starters differ. > > Do I need the late model starter even though the picture made it look like > > the solenoid and motor are MUCH closer together? > > > > ALSO: When reassembling with new starter, I found 4 wires in need of a > > (non-bolted) contact, but only 3 contacts! What's up I say? At one point > > someone wired a switch from the dash to the starter to bypass a faulty > > key/ignition. This wire was wired to the pair of contacts on the > > solenoid. Is this now replacing one of the original wires, hence leaving > > it dangling? > > > > Help, please if you know what's going on! > > > > Thanks, > > Steve > > > > > > _*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_ > > > > > > Steven Selin - s.j.selin@vt.edu > > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.