Date: Tue, 25 Jun 2002 17:41:07 -0500
Reply-To: wilden1@JUNO.COM
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Stan Wilder <wilden1@JUNO.COM>
Subject: Re: Commentary on Air Cooled Cylinder Heads
Content-Type: text/plain; charset=us-ascii
Make a record of this:
AMC is Amaedo Marti Carbonell, S.A.
Manufacturing plants in: Spain, Mexico.
US Distributor: Marnal Corp, LaHarbra Ca.
They manufacture Cylinder heads for many vehicles:
BMW, Ford. Isuzu, Mitsubishi, Peugot, SAAB, Toyota, Mercedes Benz.
They also market Valves and Guides of their own manufacture for many
rebuilders.
Thats it folks.
Stan Wilder
83 Air Cooled Westfalia
On Tue, 25 Jun 2002 16:39:43 -0500 "joe@cedar.net" <joe@CEDAR.NET>
writes:
> Silly question: AMC--who is this or what is it an acronym of?
>
> Joe
>
> On Tue, 25 Jun 2002, Robert Donalds wrote:
>
> > I currently use new AMC heads on my rebuilds for the following
> reasons
> > the type 4-2 heads take a beating and see hotter temps than most
> other air cooled heads with the exception of the zambonis ice
> resurfacers that use a type 1 single port fueled with propane. I
> have stopped tiring to rebuild OEM heads due to the fact that most
> cores are just plain old used up. The AMC heads have gotten a bad
> name because they have in the past dropped seats like the OEM heads
> did. The current version of the air-cooled AMC are staked in place
> and I have not seen any of these newer staked heads loose seats or
> have any issues with seats that have gone soft (pounded out). The
> AMC heads are made of a different alloy that is much less likely to
> crack but the new alloy also tends hold the heat a little more so
> they do run hotter.
> > Aircooled type 2-4 engines need all the help they can get to keep
> the heads and pistons as cool as possible. In my rebuilds I
> currently use a cam with higher valve lift but not more duration so
> as not to affect the injection system. I hone the cylinders for more
> piston to skirt clearance as well as notch the con rods to spray oil
> at the pistons.
> > the only other options I offer is a 2mm larger valves 42 intake
> and 36 ex with the extra hard seats and a high flow valve job nices
> upgrade
> >
> > Bob Donalds
> > Boston Engine
> > http://www.bostonengine.com
> >
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
|