Date: Thu, 27 Jun 2002 23:16:13 +0100
Reply-To: Clive Smith <clive.harman-smith@NTLWORLD.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Clive Smith <clive.harman-smith@NTLWORLD.COM>
Subject: Re: Best grease to use for CVs
Content-Type: text/plain; charset="iso-8859-1"
Gary,
Thats garbage,
1) The UK Fish and chips are the best in the world, as with CV joints we've
been addicted to them for longer than you.
2) Wheel bearings get hotter than CV joints, they're nearer the action, so
its not that!
3) CV joints, if you study the design, work totally different than ball
roller bearings. They don't roll as much or as purely, they also slide,
simple plane bearing its known as, but under very high loads when the
displacement angle is high at the same time that applied torque is too.
4) So I'd say that your last word on the subject, namely '..so I would say
most any auto
> grease will work just avoid those saturated animal
> fats. Some auto grease on the market sold in England
> is considered evironmental friendly but I am sure it
> does not make a good fish and chips.'
is a load of old cobblers (and dangerous advice too)!
----- Original Message -----
From: "gary hradek" <hradek@YAHOO.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, June 27, 2002 4:42 PM
Subject: Best grease to use for CVs
> Date: Thu, 27 Jun 2002 08:30:04 -0400
> From: David Beierl <dbeierl@ATTGLOBAL.NET>
> Subject: Re: Best grease to use for CVs
>
> At 08:21 AM 6/27/2002, aerie wrote:
> >I want to put in new grease now while I have the
> axles out of the
> >vehicle. Does anyone know the best grease to use. I
> especially do not
> >want to degrade the boots by using the wrong lube.
>
> Use CV-joint grease -- it's very special (nasty) stuff
> loaded with lead
> and
> such. Comes in 90-gm tubes or similar, each one
> supposed to be good to
> fill one joint. List wisdom is that it's better to
> use more than the
> specified amount. YMMV.
>
> david
>
> David,
> I do not think they add lead to the cv grease.
> The most important role of the grease is to lubricate.
> CV grease is redesigned wheelbearing grease that will
> handle the higher temperatures by the addition of
> sulfur "I think". The heat is from the disc brakes.
> Wheeling bearing grease could handle the heat from the
> drum brakes. I think that high temperature grease
> does a better job at higher temperatures but make
> little difference at lower temperature. I do not
> believe that vanagon joints are hot joints unless you
> have added disc brakes. So I would say most any auto
> grease will work just avoid those saturated animal
> fats. Some auto grease on the market sold in England
> is considered evironmental friendly but I am sure it
> does not make a good fish and chips.
> cheers, gary
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
|