Date:         Mon, 24 Jun 2002 07:02:16 -0700
Reply-To:     mike <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike <mwmiller@CWNET.COM>
Subject:      Re: [Syncro] how can I tell if it's a rebuild?
Comments: To: Brent Christensen <sbsyncro@hotmail.com>
In-Reply-To:  <OE68wgKuu8FZgNVWa60000174d5@hotmail.com>
Content-type: text/plain; charset="US-ASCII"

I just got one and I'll check but I don't remember any steel tag.

Mike

> From: Brent Christensen <sbsyncro@HOTMAIL.COM>
> Reply-To: Brent Christensen <sbsyncro@HOTMAIL.COM>
> Date: Sun, 23 Jun 2002 23:22:43 -0700
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: [Syncro] how can i tell if it's a rebuild?
>
> I don't know if this applies in other countries, but here in the US, I have
> never seen a comercially-done rebuild without a steel tag affixed to the
> block (or stamped into it) that tells the rebuilder, the date, and the
> machining  of the main bearings, cylinders, etc.  (this includes my VW
> Canada WBX motor).
>
> Not sure if this would apply to a SA motor...  Check the back of the block -
> these stamps/tags are usually somewhere near the absolute back of the block
> (near the flywheel).
>
> Brent
> ----- Original Message -----
> From: "Matthew Pollard" <poll7356@uidaho.edu>
> To: <vanagon@gerry.vanagon.com>; <syncro@yahoogroups.com>
> Sent: Friday, June 21, 2002 12:29 PM
> Subject: [Syncro] how can i tell if it's a rebuild?
>
>
>> i have reason to believe that my tiico is actually a rebuild. Is there a
>> way to tell if it's a rebuild? is there a date-stamp cast into it? do
>> rebuilders leave some sort of mark to say it's been rebuilt?
>>
>> thanks
>> matthew
>>
>>
>> If you would like to modify your subscription settings (including
> unsubscribing), visit:
>> http://groups.yahoo.com/group/Syncro
>> Please remember that rude or offensive language is not allowed on the
> Syncro list. Please try your best to resolve differences privately and keep
> them off the list.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>
>>
>>
>