Date:         Wed, 26 Jun 2002 23:38:00 -0700
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      Re: tri-star fender flares------looking for pictures of these on
              Vana              gons.....anybody seen these?
Comments: To: "Smola, Tony" <TSmola@TRIBUNE.COM>
In-Reply-To:  <23F66E6D73F4D31181C60004ACA369D7023A52AC@ERD-LA-EXMB1>
Content-Type: text/plain; charset="iso-8859-1"

I recommend the Syncro 16 wheel arches over the Tri-Star - they just fit
better if you are running larger tires.  The Tri-Star arches will actually
make your openings smaller.  Minor trimming in the rear is required for the
Syncro 16 arches.  I sell these for $500 USD for the set.  They are not
cheap, but they are very nice!

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Smola, Tony
Sent: June 26, 2002 4:06 PM
To: vanagon@GERRY.VANAGON.COM
Subject: tri-star fender flares------looking for pictures of these on
Vana gons.....anybody seen these?


Hello fellow Vanagonites,

I am looking for pictures of the cool fender flares...the tri-star
type......I have the SVX motor going into my 85' Westy,
and I was able to utilize the factory 16 X 7.5 jj alloys from the
SVX.....the wheel height is the same as the MXT's
which I will be selling......there is less than 5K on the tires......
Anyway I wanted to see some photos of Vanagons with the cool wheel
flares............the SVX wheels have a 55 mm offset, but  with
the adaptors they fit perfectly under the wheel arches........And I just had
to take the front wheels to my vertical mill to open the center hub area and
created a new lip for the stock center caps........looks totally
original........