Date:         Wed, 26 Jun 2002 20:30:02 -0500
Reply-To:     Carlota <carlotazavala@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Carlota <carlotazavala@HOTMAIL.COM>
Subject:      Westy height fixing

Hi amigos:

A few days ago, I took all rear and front suspension in order to correct
that left limp that  happens to all our westies.
I found a rubber disc on top of springs which, I supposed, was to level the
van. I noticed that they were taller than the half inch i needed to add so,
instead of adding I proceeded to cut that measure from the disc.

After cutting the right hand disk I thought the van would be leveled but it
has the same left syndrome; nothing changed.

My question is: How do I measure the gap from tires, height or whatever, in
order to calculate the seize of disc I have to add (never cut again).

TIA


Javier