Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (June 2002, week 5)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 30 Jun 2002 11:04:57 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Transmission will not go into gear
Comments: To: WVVW <wvveedub@NETSCAPE.NET>
In-Reply-To:  <6F58293C.16ACE076.00B0D2D4@netscape.net>
Content-type: text/plain; charset=US-ASCII

If you can get it in to gear with the engine off, than the problem is that the clutch is not disengaging. The chirping noises indicate ban release bearing or pilot bearing. Anyway, you need to pull the transmission to check it out.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of WVVW Sent: Sunday, June 30, 2002 10:58 AM To: vanagon@GERRY.VANAGON.COM Subject: Transmission will not go into gear

Yesterday we were on our way back from Greenbrier State Park, winding our way back down a narrow mountain road. To slow our decent, I had let the van simply coast in third gear. A couple of minutes later, when passing through a small town, I tried to downshift from third to second. Making the shift was difficult, though it took several tries and a bit of force to do so.

The rest of the ride was uneventful until we reached our neighborhood. Suddenly, the van refused to go in first, second, or third and I had to yank on the gear shifter to get the van out of gear. I was able to force it into fourth gear, but the clutch made a chirping sound when I did it. I chugged in fourth back into our drive. Once stopped, I could not get it in any gear with the clutch fully depressed, only grinding noises. With the engine off, I could easily go into all the gears.

This morning, I crawled around to see if I could see any thing strange. Nada. I was able to measure about 20 mm of movement in the slave cylinder arm when the clutch pedal was pressed and released.

My trusty Bentley book is great if I plan on tearing down and rebuilding the tranny, but leaves me clueless if I am troubleshooting a clutch (?) problem.

Your thoughts are appreciated.

-- Brian '85 Vanagon 7-passenger GL __________________________________ __ /____ ______ ____== ___________\ ___ // | | | | \== \ \\ _____ // | | | | \== \ \\ //______| |______| |______\== \__________\|______ | - | | | | @ |______ _[ ____ __ _ [|][WVVW][|]_ |__] // \\ / \ |___|____________| `---/| () |\--------|| () |---/=)________)=o{}=={ }=={ } _________\__//_\__//____ \__//__\__//____________

__________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/

Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.