At 11:04 AM 7/1/2002, Dan Barrett wrote: >Folks, > I'm in the middle of repainting my wiper arms to get rid of some light > rust. > The driver's side wiper arm, however, will not come off the bolt. I > loosened the nut, removed the washer, and let some WD-40 soak in for > awhile, > but no luck. Any good way of getting the thing off? I've been treating it > pretty gingerly thus far. I'd try a battery terminal puller, or some other very light-weight puller. You need to get the pull aligned along the shaft. Get a bit of tension on it and if it doesn't pop right off then start tapping on the side. david
-- David Beierl - Providence, RI http://pws.prserv.net/synergy/Vanagon/ '84 Westy "Dutiful Passage" '85 GL "Poor Relation" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.