Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2002, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 5 Jul 2002 10:42:28 -0600
Reply-To:     "Blake C. Thornton" <thornton@MATH.UTAH.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Blake C. Thornton" <thornton@MATH.UTAH.EDU>
Subject:      Re: Alternative mufflers in place of OEM etc..
In-Reply-To:  <NFBBJNNPJEDBENEJIJMJKENFCEAA.blackburn@codenet.net>
Content-Type: TEXT/PLAIN; charset=US-ASCII

I'm a bit confused. Why go through all this trouble when busdepot has mufflers for $80 or so.

blake

On Fri, 5 Jul 2002, Michael Blackburn wrote:

> I decided the price of the VW muffler was a little much for me to stomach > last summer... > > I ended up at a pretty good muffler shop that suggested an alternative to > the stock arrangement. (I had a 1987 2.1 Westy) I ended up needing the > header pipes and ordered them from Bus Depot. But, the only other part > needed was a muffler. The shop used a standard '5" Dodge Can' and welded > the exhaust flange from the old muffler onto it. The Dodge can is a little > shorter than the stock VW can, so an extra long tailpipe was welded on to > make the tailpipe look stock. > > The muffler just clamped into one of the muffler clamps since it was a > little short. But, overall it worked quite well, sounded, and ran just the > same. Well, a little better since the exhaust leak was gone. I think the > total cost of the muffler, welding, and installation was about $100. > > > > Michael Blackburn > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf > Of Marshall > Sent: Friday, July 05, 2002 1:13 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Alternative mufflers in place of OEM etc.. > > > Hi Volks: > > I wonder if any of you have experience using a generic muffler in place of > the stock. > > I'd think that the inlet and outlet sizes need to be the same as stock, and > the body of the muffler should be about the same shape/dimension as the > stock. > > Suppose the above parameters were met in a generic muffler - could it be > used? > > TIA, > > Marshall Ruskin > 84 Westy 1.9 litre > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.372 / Virus Database: 207 - Release Date: 6/21/2002 >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.