Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2002, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Thu, 11 Jul 2002 13:53:58 +0100
Reply-To:   Clive Smith <clive.harman-smith@NTLWORLD.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Clive Smith <clive.harman-smith@NTLWORLD.COM>
Subject:   Re: Getting a Handle on the Handling of the Vanagon
Content-Type:   text/plain; charset="iso-8859-1"

'..Does anyone have any recommendations for shocks with additional dampening but not added firmness? What you are really saying here is that you require shock absorbers with a greater rebound damping rate (they're really called dampers!) and a similar or lower bump rating. You should be able to get these specs from custom shock mfrs. and the more expensive adjustables used to offer independent adjustment of these two rates.

Clive Smith '88 Syncro Transporter

----- Original Message ----- From: "Ben T" <BenTbtstr8@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, July 11, 2002 1:33 AM Subject: Re: Getting a Handle on the Handling of the Vanagon

> Robert, > > I am disappointed to find out that you had such trouble with the H & R > springs with the KYB's. I was contemplating them since our last discussion of > the set-up. I have since had the H & R's installed in my 87 2wd Vanagon > (non-Westy). I retained the existing Boge shocks to experiment on ride. I was > intending on trying the KYB's for cost reasons. Now I don't think I will need > to. > > The ride on my H & R equipped van is quite comfortable. Bu then I do not have > the stiffer gas shocks. I did notice that the shocks require updated > dampening. I am considering adding Bilsteins to improve the dampening. The > ride is firm but compliant. I don't experience the pitching that you are > describing. Even with the stock anti-sway bar, she turns much flatter around > the corners. Perhaps I am just not pushing it as hard as you are. Or perhaps > the softer oil shocks help. I don't really know at this time. > > I will upgrade the anti-sway bar but want to resolve the dampening issue > prior to adding further complications. Rear bar will be added as well. > > Does anyone have any recommendations for shocks with additional dampening but > not added firmness? An adjustable shock would be ideal but would probably be > cost prohibitive for my project. Maybe an outboard 2nd set of shocks? > > Once this is all said and done, I will start looking at low profile tires > with stronger sidewalls. The Toyo Proxes from a Porsche are just too soft in > the sidewall area. I got them used but in very good shape. Within 2 months of > hard driving while testing my new springs. They have started to show cracking > on the sidewalls. These are VR rated tires. I have used ZR rated tires with > the stiffer sidewalls w/o any noticeable sidewall problems. Cost makes them > slightly less desirable. Does anyone make load rated 50 & 60 series tires? > > This brings me to one more point. I don't know what tires and rims Robert was > using on his van. I am using 15"X8" Porsche Fuchs are et23 front and back. I > would have liked to use 7's in front but had these handy. It is most likely > that my new track is much wider than Robert's van. For those who want to > know, the Porsche Fuchs I am using have been redrilled to Vanagon pattern. > > I will be bring this van to the September Van-O-Rama in San Francisco along > with my Syncro 16 Doka. > > BenT >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.