Date:         Tue, 9 Jul 2002 08:00:57 -0400
Reply-To:     Hector Zapata <hector.zapata@XRXGSN.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Hector Zapata <hector.zapata@XRXGSN.COM>
Subject:      Re: [info] stock temp guage & vdo guage (coolant)???
Content-Type: text/plain; charset="iso-8859-1"

I carefully drilled and tapped a hole on the thermostat housing for the VDO
temp sensor, and it has to be grounded in order to work. My van is a 1990,
and the thermostat housing is new. I did this to my wife's Jetta many moons
ago, snd the plastic hasn't cracked at all. Both vehicles have the stock
gauge dissabled. By the way, I still need to find that gauge cluster housing
and printed foil.



Héctor

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.