Date:         Sat, 13 Jul 2002 09:41:54 -0500
Reply-To:     Dave Baker <DBAKER5@KC.RR.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dave Baker <DBAKER5@KC.RR.COM>
Subject:      Some Info & a Question
Content-Type: text/plain; charset="iso-8859-1"

For those of you who may be interested, Gnarlodious (aka Rachel) made it to
KC on her way from Santa Fe to NYC.  She pulled in my driveway on the
afternoon of the 11th and left early yesterday morning.  Her 83 diesel
Vanagon was humming right along.

The big news from KC is that Wolfy got back on the road today.  I took him
on a tour of the neighborhood, and he did not disappoint (much).  Hardly any
valve noise, engine ran smooth as long as my foot was on the accelerator.
When I downshifted and dropped off the gas, I experienced some bucking due
to the "idle hunting" syndrome I'm experiencing.

Photos and text at:

http://members.fortunecity.com/davebaker1/westy/id46.htm

Film at 11.

Now the question:  I'm attempting to bleed my cooling system.  I opened the
bleeder on the radiator, and I know there's supposed to be a bleed valve on
the big hoses mounted to the front top of the engine compartment on my 85
1.9 L.   There is a fitting with a knurled knob near the left side of these
big hoses, but I cannot figure out how to operate it.  I've turned it in and
turned it out, but all it wants to do is rotate without doing anything.
What am I doing wrong here?

Thanks in advance.

Dave in KC
85 Westy