Date:         Mon, 8 Jul 2002 23:06:56 -0500
Reply-To:     Andrew Bell <andrewbell@QWEST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Bell <andrewbell@QWEST.NET>
Subject:      Re: Bosch generic 02 sensor #
Comments: cc: Various <AllStuff@HANS-WILLY.MYIP.ORG>
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
              x-mac-creator="4D4F5353"

Anyone know of where to find this beast? Any vendors out there selling it?
Cost?

Thanks -

AB

Various wrote:

> A little late replying to the message below, but I didn't see any responses,
> so here's what I have:
>
> Bosch number for generic one-wire sensor, without connector (just a crimp
> and shrink wrap):
>
> 11027
>
> Other numbers found on sensor casing:
>
> 0 258 001 027 009
> 964 26 00
> 928
>
> I believe it is functionnaly exactly the same as the one with the connector,
> but less expensive.
>
> I installed mine last week on my 1.9L, went on a 600km jaunt, no problema!
> The van runs a lot more efficiently than with the old sensor or open loop. I
> guess I will save the cost of it in the first 1500kms, but I'm too lazy to
> do the math.
>
> alias Fred aka Bleu Schtroumpf
>
> -----Original Message-----
> From: Bob Whitby [mailto:rpwhitby@MINDSPRING.COM]
> Sent: 15 avril, 2002 14:00
> To: vanagon@GERRY.VANAGON.COM
> Subject: Bosch generic 02 sensor #
>
> Does anyone have a part number for the Bosch generic 02 sensor? I can
> already see the blank stares at the local FLAPS when I mention the word
> "Vanagon." (Quote from kid at stereo store: "Never heard of one of those.")