Date: Tue, 9 Jul 2002 23:03:54 -0500
Reply-To: Marshall <mjruskin@SHAW.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Marshall <mjruskin@SHAW.CA>
Subject: New subject: Improved AC performance
Content-type: text/plain; charset=iso-8859-1
Hi Volks:
As promised, here's the third post from the same gent.
May he always be remembered as the "coolest guy in Vanagonia".
Marshall Ruskin
84 Westy "Impoverisher""
----- Original Message -----
From: "Ed McLean" <email99@BELLSOUTH.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, November 13, 2001 08:46 PM
Subject: AC high current problem fixed and improved AC performance
> I also have had problems with high current draw from my '86 Westy air
> conditioning fan. After a little thought I developed a good solution
> that had the added benefit of significantly improving the performance of
> the air conditioning system.
>
> I found my Westy air conditioning fan was drawing a enough current to
> overheat the fan switch. In my case, the fan switch would last about a
> year before the high speed switch contacts would overheat and fail. I
> eliminated the problem with the switch by installing a gang of three 40
> amp load reduction relays inside the air conditioning cabinet to provide
> the current to drive the evaporator fan. The current for the fan was
> provided by the +12 VDC terminal in the wiring connection box in the
> engine compartment via a heavy gauge wire and an 50 amp circuit
> breaker. The relays were controlled by the original air conditioning
> fan switch, one for each speed. All wiring connectors were crimped and
> soldered. I found the high speed relay would stick after long runs so I
> piggybacked a second relay in parallel to split the current draw. This
> has worked very well with no problems for several years.
>
> One unexpected benefit is now the air conditioning fan is supplied with
> power that has not suffered the considerable voltage drop from the
> original fan switch and small gauge wire. I did not measure the voltage
> available at the fan in the stock configeration but it had to me much
> less than it is now. The air conditioning now works much better because
> the fan blows much stronger. The present Low speed is about equal to
> the previous Medium speed. The High fan speed is awesome and is more
> than adequate in blowing cold air up to the driver and front seat
> passenger in hot weather and is actually too strong except for initial
> cooling off after sitting in the sun. In fact, I had previously
> installed a second evaporator unit over the glove compartment (another
> story altogether) to cool the folks in the front. With the improved fan
> operation, the second air conditioning unit would not have been
> necessary.
>
> I highly recommend adding load reduction relays to provide adequate
> voltage to the air conditioning fan.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.372 / Virus Database: 207 - Release Date: 6/25/2002