I noticed that the door on my refrigerator was not fully closing on the fridge inside. The gaskets on the door were not fully touching the fridge itself. Will get some 1/8" or 1/4" compressible weatherstrip and attach to fridge where gasket seals to insure full contact. Do a test with some paper strips to see if your door seals fully contact the fridge. If the door isn't closing tightly to the fridge you are losing a lot of cooling capacity. Door shuts and latches OK, just doesn't contact fridge! |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.