Ok, I had to pull out my fridge to fix the rust on the side of the van. Installed the fridge then realized I did not hook up the 12V system. Plugged in connector but did not know where to attach black ground wire with spade connector. Found on back of fridge a green wire running from a set of apparent ground wires to a lug on the back of the fridge - it appeared the whole thing was grounded on the top. So, I pulled it off and attached the black ground wire from the 12V connectgor to that. Where was the 12V connector spade ground supposed to go? Is everything OK? Anybody got a picture of where all this stuff attaches? Also, somebody was looking for an exhaust system. I've got a muffler, tail pipe and rear exhaust (closest to bumper) twin pipe system that hooks to heads. Pay shipping and it's yours. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.