Date:         Mon, 15 Jul 2002 12:18:19 -0600
Reply-To:     Bob Stevens <mtbiker62@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bob Stevens <mtbiker62@HOTMAIL.COM>
Subject:      '91 Westy-Rubber Hose
Content-Type: text/plain; format=flowed

I've looked in the Bentley, seen drawings + pictures of the rubber tubing
going from what appears to be the engine "breather" (vertical, plastic tube
with cap, about 4-5 inches high) to the throttle body. I is located just
above the middle of the engine, just under the idle speed control valve. In
the Haynes, there is adrawing of it on page 4B-5, illustration titled:
"5.3", which illustrates Accelerator cable adjustment, and the numbers 2 and
3 are hovering over this rubber hose.
Anyway, mine has burst and has a long split in it and I have duct-taped it
temporarily. Without the tape the split allows oil to mist the engine
compartment in that area.
Any names for this hose so I can order it would be appreciated....if you can
figure out what I'm talking about above.
Thanks in advance for any helps....
Bob Stevens

http://groups.msn.com/BobsPhotoShare



_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com