Date:         Wed, 17 Jul 2002 20:52:34 -0400
Reply-To:     David Wilhite <dnmwilhite@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Wilhite <dnmwilhite@EARTHLINK.NET>
Subject:      Thanks - Vent Windows
Content-type: text/plain; charset=US-ASCII

Thanks guys.

I removed the roll pins with a small punch and hammer and removed the
little chrome locking mechanisms.  The windows are tinted and I am ready to
put back on.

As a side note, I removed one of caps from the vent window; the one
opposite the locking mechanism;  I used this to trace out a circle on the
window tint with my cutting blade.  This was for the hole needed for the
locking mechanism shaft.

Thanks again.


David Wilhite
86' Syncro GL (For Sale)
01' KLR 650
84' Subaruvanagon

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.